What do you need to do when choosing a spirit level?
- Know how a spirit level works
- Understand how to read the measurements
- Check the material used
- Look into the different types of spirit levels
A spirit level is a type of tool that can help you figure out if a surface is completely level. It’s a must-have tool in the Philippines if you’re a bricklayer, a builder, a surveyor, or even a home DIY enthusiast. It can help with ordinary household tasks, such as hanging up a photo frame. If you’re interested in choosing a spirit level, here is a short guide to help you out. Keep on reading!
Know How A Spirit Level Works
Before you can choose a suitable spirit level for your project, the first thing you need to do is to know how it works. A spirit level is the most basic level tool you can use. It gets the name from the mineral spirit solution that is inside the tool. The tool shows you whether a surface is horizontal (level) or vertical (plumb) via a bubble located inside the liquid vial.
To use a spirit level, place it in the center of the object you want to be level. Most spirit levels have two sets of lines. The surface is level if the bubble is at the center of the inside lines. When the bubble touches one of the outer lines, the surface is at a slope. The outer lines are useful if you’re building sidewalks, rain gutters, or waste lines.
Here are some of the tasks where you might need a spirit level:
- Laying bricks
- Pouring concrete
- Hanging a shelf and kitchen cabinets
- Hanging a photo frame
- Trim out a door
Understand How To Read The Measurements
Before choosing a spirit level, it’s also important to know if the measurements are easy to understand. A spirit level should have vials that are easy to view for an accurate reading. You should also be able to read the measurements from different angles. This is essential because you will spend a lot of time looking at the vial to ensure that your work is leveled.
There are models that have magnetic edges that stick to metal surfaces to make it easier to level a surface. Other than that, there are also torpedo levels and other specialized levels with an angled tube if you want to find the level at an angle.
To get the best reading, you can check a spirit level for accuracy too. Below are some steps that you can follow:
How To Check Accuracy Of Spirit Level
- Place the spirit level on a flat surface.
- Mark the end of the level. Then make another mark under the vial, on the side of the spirit level.
- Check the bubble’s position.
- Turn the spirit level 180 degrees and align it with the previous marks.
- Check if the bubble is in the same position as the previous reading. In this case, the level is accurate.
Check The Material Used
Just like your other tools, choose a spirit level that is durable and will withstand knocks and impacts. Something that is made from plastic has lower chances of standing up to numerous bumps. If you’re looking for something durable, then choose a spirit level that is made of aluminum material. Other than that, rubberized handles can also make the tool easier to hold even with just one hand.
The Industrial Spirit Level from Tolsen has all these features covered. It’s made of a heavy-duty aluminum frame and has humanized rubber handles for easy grip. Other than that, it also has anti-shock end caps too.
Look Into The Different Types Of Spirit Levels
If you’re looking for spirit levels, there are plenty of variants here at Tolsen:
Mini Spirit Level
From the name itself, the mini spirit level is smaller than an ordinary level. It’s 22.5 cm in size, so it can easily fit in the pocket for quick leveling tasks. There is also an industrial variant of the same size. Although these levels are small, they’re made with aluminum for durability.
The standard spirit level is available in various sizes, from 40 cm to 200 cm. The length you purchase will depend on the work you are doing. For instance, you can use shorter spirit levels when you’re just hanging a photo frame, but if you’re laying bricks, you might need a longer one.
Magnetic Spirit Level
The magnetic spirit level from Tolsen is useful for leveling metal surfaces. It’s beneficial when working with metal studs, around pipes, and conduit.
Industrial Spirit Level
Made with a heavy-duty aluminum frame, the industrial spirit level will withstand impacts easily. Its accuracy is 0.5 mm per meter, which is one of the best when it comes to this type of tool. This Tolsen spirit level is also suitable for pipe works. There is also an industrial bridge spirit level and industrial spirit level with magnetic.
A spirit level is useful for figuring out if a surface is completely level. Before purchasing one, you need to know how it works, how the measurements are made, how to test for accuracy and the material that it’s made of. There are various types of spirit levels you can choose from depending on the job you’re taking on.
If you need help choosing a spirit level, you can contact us here at Tolsen! We can help you pick the best tool to help you with your projects.